HT1010BS Vetus hydraulic tank 130 liters, incl. 3x control valve HT1013 bow and stern thruster, wind

In stock

6,398.00
Price incl. VAT, plus Shipping
Delivery weight: 140 kg


The hydraulic installation on board a ship also includes a tank (expansion tank) that is used to store the hydraulic oil. This serves as a buffer for the hydraulic fluid and at the same time offers the possibility of cooling the oil if necessary. On top of that, the cover of the hydraulic tank offers the possibility of mounting all control and regulating units that are required to operate the various devices. VETUS delivers this hydraulic tank ready for operation with all the control units ordered, fully assembled. Additional control and regulation units may be supplied individually. These can then be easily mounted and connected to the cover of the hydraulic tank. The selection of the tank depends on the application required.
Aluminum hydraulic tanks HT1010 and HT1028 contribute to the cooling of the hydraulic fluid, the cooling of the
Hydraulic fluid is dependent on the temperature of the machine room and other environmental factors such as
Air temperature. The cooling capacity of the hydraulic tank is therefore unpredictable and Vetus recommends sea water-cooled ones
Hydraulic liquid cooler to be installed in every system. If there is no oil cooler installed for cost reasons, the temperature must be constantly monitored, if necessary a cooler must be retrofitted.

• The lid of the tank can be used as a motage plate for the control units.
• VETUS delivers the tanks ready for use with mounted control units
• Additional control units can be retrofitted if necessary
• Connections are labeled.
• Connections are set so that the suction line ends directly in the pump.
• Connections for one or more pumps
• Installation on bulkheads, partitions only by OEM or specialist companies.
• For the sake of simplicity, valves are mounted on the lid of the tank.
• Sufficient space for the tank and accessories must be planned

We provide

Danfoss Power Solutions
Danfoss Industrieautomatik
Turolla
Reggiana Riduttori
HydraForce
Hydro Leduc
HBC-radiomatic
Cavotec

 

This unit consists of:

157B2000    
157B5113
157B4248
157B6233
157B7113    
157B8001
157B3171
157B4128
157B280
GPN700 R3/4”
GPN700 R1/2”
155U2606 Joystick

We are your partner purchase, construction, service and repair. With our well-stocked warehouse, we offer optimal support, for example, to PVG 32nd

Danfoss Power Solutions is a leading manufacturer and supplier of mobile system solutions and supplies markets worldwide with hydrostatic drives, pumps for open and closed circuits, motors, valves, steering components and electro-hydraulic controls - either as components or as an integrated system.

The extensive product range of Danfoss Power Solutions builds on over 45 years of experience in mobile hydraulics.

     hydraulic motors
     Proportional valves (such as the PVG 32)
     Mobile Electronics Components
     Hydrostatic steering
     Gear pumps motors and-
     Axial piston pumps for open and closed circuit

 

Accessories

Product Note Status Price
Danfoss 155U2606, Joystick Danfoss 155U2606 Danfoss 155U2606, Joystick Danfoss 155U2606
676.20 € *
Delivery weight: 3 kg
Danfoss 084Z3273 temperature sensor MBT 5250, Danfoss TwinDisc, Danfoss MTU Danfoss 084Z3273 temperature sensor MBT 5250, Danfoss TwinDisc, Danfoss MTU
313.80 € *
Delivery weight: 2 kg
Isotherm ASU cooling unit 125L, No. 3251 - conversion kit to seawater cooling for tropical areas Isotherm ASU cooling unit 125L, No. 3251 - conversion kit to seawater cooling for tropical areas
1,798.00 € *
Danfoss PVG 32, proportional valve, incl. Joystick, 24V Danfoss PVG 32, proportional valve, incl. Joystick, 24V
2,723.10 € *
HEAT EXCHANGER ZF MOTA 009 HEAT EXCHANGER ZF MOTA 009
2,461.20 € *
Condaria WATER CHILLER UNIT, PCWM 22503 230/1/50 – BTU 90000 Condaria WATER CHILLER UNIT, PCWM 22503 230/1/50 – BTU 90000
27,596.20 € *
Delivery weight: 260 kg
Scot Pump B57017 (Chilled Water) Impeller 4.75" Diameter 2 Hp 50/380V ODP Motor  / Dometic 225500161 Scot Pump B57017 (Chilled Water) Impeller 4.75" Diameter 2 Hp 50/380V ODP Motor / Dometic 225500161
5,194.80 € *
Delivery weight: 55 kg
Danfoss 3131770147, PARKER CPU BASIS MODUL PLC MIKROSMART, Sea Recovery Tasman Sea Danfoss 3131770147, PARKER CPU BASIS MODUL PLC MIKROSMART, Sea Recovery Tasman Sea
2,563.00 € *
Delivery weight: 3 kg
PARKER MEMBRAN 8" HR/HY with seal, Parker 27240331PK PARKER MEMBRAN 8" HR/HY with seal, Parker 27240331PK
2,749.00 € *
Delivery weight: 20 kg
Danfoss L45D hydraulic pump L45D, Danfoss KRL045DLS2014 Danfoss NNN3C2NFA6NPL Danfoss hydraulic bow Danfoss L45D hydraulic pump L45D, Danfoss KRL045DLS2014 Danfoss NNN3C2NFA6NPL Danfoss hydraulic bow
1,739.00 € *
Delivery weight: 30 kg
PARKER Tasman Sea T-3, 16000 GPD, 440V, 3 phases, 60 Hz, Watermaker + 6x Membran PARKER Tasman Sea T-3, 16000 GPD, 440V, 3 phases, 60 Hz, Watermaker + 6x Membran
136,516.90 € *
Delivery weight: 300 kg
Vetus PVG 32, proportional valve Vetus PVG 32, proportional valve
3,293.00 € *
Delivery weight: 10 kg
Vetus PVG 32, Vetus double proportional valve valve PVG32 incl Joystick Vetus PVG 32, Vetus double proportional valve valve PVG32 incl Joystick
5,126.00 € *
Delivery weight: 20 kg
* Prices incl. VAT, plus Shipping
Display accessory details

We also recommend

Danfoss 155U2606, Joystick Danfoss 155U2606
676.20 *
Delivery weight: 3 kg
PARKER MEMBRAN 8" HR/HY with seal, Parker 27240331PK
2,749.00 *
Delivery weight: 20 kg
Vetus PVG 32, proportional valve
3,293.00 *
Delivery weight: 10 kg
* Prices incl. VAT, plus Shipping

Browse these categories as well: Maintenance, Home MARITIMUS Boat Shop, Worldwide delivery, delivery of leading brands, Special Deals March, Spezial Deals 2024