Spare Parts

Spare Parts

Spare Parts
Everything arround the steadicam

Display per page
Sort by
1 - 30 of 48 results

Availebal for 1,5" and 2" This bracket has been designed to allow for single handed operation, freeing the operator’s hand allowing him to support the rig. The PVC C-mount protects the sled post from any unwanted damage. The rig is secured within the bracket via a safety ring. The bracket has a verity of machined wholes that offer the operator multiple places to hang other equipment and secure tools. As soon as you can read SAVE you can be sure that the locked system will be secure. The slotted aerear will keep your small things like screws in place. the rear pinn to level the steadi. is toolfree and workes like an air craft pinn, it can be removed to have one side flat to save space in your case.

World wide shipping is incloudet, please choose customer pick up by check out, for faster shipping, i will send shipping options special for your order and location.

330.00 *
Delivery weight: 320 g

In stock
can be shipped within 2 days

The hard mount has been designed with a telescopic configuration. Allowing the operator to adjust the high at witch it sits. The socket block has been designed to work with all regular Steadicam arms.

595.00 *

In stock
can be shipped within 3 days

The Sushi Sever lowmode cage Is an universal lowmode cage for all cameras. The cage is telescopic and can be set from 8 inch up to 12 1/2 inch. Included are two support rods with 15mm diameter and two screws 3/8".

425.00 *
Delivery weight: 650 g

In stock
can be shipped within 3 days

This adapter allows any regular c-stand to work with the docking bracket. It has been designed to offer a more secure attachment for your rig when docked.

45.00 *

In stock
can be shipped within 3 days

We stock Motor Rods in a variety of lengths and diameters. Short rods – 100mm Long rods – 150mm Both available in either a 15mm or 19mm diameter.

35.00 *

In stock

The ARRI Bracket fits to all our dovetail plates and allows for a matte box and other accessories to be secured to the camera. Rod distance is 104mm. Bracket is designed in 1998 for ARRI 35mm fim cameras to carry the madbox lens supports..... Today it is helpfull to save some space for focus and iris motors, the 19mm rods will pass the dovtail plate and dit not disturbe the camera.

Incloudet are 4 screws to mount the bracket to the dovtail, it will fit to the old dovtails with 50mm and the new plates with 60mm motor rod distance.

85.00 *

In stock

Extension brackets for 15mm rods available in 60mm

55.00 *

In stock

Available in sizes suited for DV, broadcast and film camera.
55.00 *

New to our product range is our extendable support rod. Giving you the ability to simply extend the rods rather than replace them, allowing for a much quicker operation as well as a variety of camera set ups. The screw thread has been milled to a depth that makes the rod when joined smooth as a single piece rod, allowing for the rods to slide cleanly through the dovetail plate. The rod is 75mm in length and can be extended by another two sections 50mm and 25mm in length - or can be purchased as single parts.

75.00 *

In stock
can be shipped within 2 days

Our socket block has been precision machined from high grade aluminum alloy (7075) and then anodized to offer a greater level of protection. The block has been designed to fit all existing arms. On purchasing your Socket Block please tell us if it is for a use with a vest or for a hard mount, as the screw configuration differs.

300.00 *

In stock
can be shipped within 2 days

The Cat-griller is an universal adapter plate to connect our Steadicam plate with a regular tripod head. The Steadicam plate can stay under the camera allowing the operator to switch from the tripod and back to the Steadicam at a much greater speed. Catgriller on YouTube http://www.youtube.com/watch?v=8izDHZ844Pg

210.00 *
Delivery weight: 475 g

In stock
can be shipped within 2 days

This telescopic monitor bracket is designed for either a 1.5” or 2” post. With interchangeable rods allowing the monitor position to be easily shifted (we will fir out bracket to your monitor).

425.00 *

In stock
can be shipped within 2 days

Monitor arm for 1.5” and 2” posts

250.00 *

In stock
can be shipped within 2 days

To fly a backup monitor we have made our birod monitor arm to fit the master series.
425.00 *

In stock
can be shipped within 2 days

Our hard mount pins are machined from a high grade aluminium. This Euro pinn can be mounted on a plate or cheese board to allow for the attachment of a hard mount. The red ring which is together with the screws part of the kit, allows the pin to fit firmly and securely to a base. We also manufacture our Euro-pins from stainless steal (please ask for more information)

75.00 *

In stock
can be shipped within 2 days

Our hard mount for Mitchelbase has a 2 inch post and can be raised about 5 inch. You fix the hard mount on the mitchelbase (Flat Base) with the large blue nut - without tools and in seconds. The post can be used with an pipe clamp system without the part for the mitchelbase. Our hard mount can be used as an adapter from Mitchelbase to Euro-Pin.

595.00 *

In stock
can be shipped within 2 days

Please choose customer pick up by check out. Worldwide shipping is incloudet, for fast shipping please contact me, i will give you your special shipping options

Mickey on You Toube http://www.youtube.com/watch?v=2oFt_64Wsio Dynamic balance level Mickey. Mickey will be used before mounting the camera and the focus unit and is able to show you if your battery and monitor weights are in the center of the post. Mickey allso will show you if your monitor has to move to the right or left side. Mickey just works close to 98% of dynamic balance. For the last 2% please read Dynamic Primer from Jerry Holway.

135.00 *

In stock
can be shipped within 3 days

60mm motor rod extension, 15mm to 19mm or vice versa

55.00 *

In stock

Toolfree J-Bracket with centerclemp and safety pinns. post Diameter is 5/8" (15,86mm) for Master Arm and other Post diameter we can offer an reducer with clempring to jump from 5/8 to3/4" please visite our YouTube link for J-Bracket http://www.youtube.com/watch?v=AxgBmIFMLWs&context=C4ae478bADvjVQa1PpcFPTZ8Z2nDPkuyEatAyfnzM2oaAB1zJkOPU=
325.00 *

In stock
can be shipped within 2 days

The arm post rod measures 5/16” in diameter Available in a variety of size from 4” -9”

32.50 *

In stock
can be shipped within 2 days

The Arm Post Clamp ring is made for use with 5/16" arm posts. Clamp ring is secured with a metric srew (M5)

35.00 *

In stock
can be shipped within 2 days

With this Ring can nearly all fim lenses with PLmount work as an makro lens, for exampel to show a handy display as an close up. A must have for all camera operators

169.00 *

In stock

The Zoom control Handle should help by lowmode to mount your zoom control unit on an position where you can reach it, or to have an ergonomic grip by lowmode and the j-bracket underknees the arm. Please visite our Youtube link for the zoom control handle http://www.youtube.com/watch?v=eBxSfd-IdaU&context=C4636d5dADvjVQa1PpcFPTZ8Z2nDPku5ED2nkCm8zcoYZezBxvjCQ=
110.00 *

In stock
can be shipped within 3 days

V-Bracket or bettern knewn as F-Bracket saves weights and gives you an better Angel to work with your Post. Please visite our YouTube V-Bracker VS J-Bracket http://www.youtube.com/watch?v=KIyXhxLB74s&context=C457cca9ADvjVQa1PpcFPTZ8Z2nDPku3-cn5b2yuObco1ts_7P7ws=

320.00 *

In stock
can be shipped within 2 days

Arri Alexa Bracklet, We have decidet to offer an Bracked wich normaly should be orderd by the Cmera Rental house, but wehn it was not ordered for the steadiam operator can`t use our V-Mount snap palte.

95.00 *

In stock
can be shipped within 2 days

Catgriller for Zephyr, Clipper,Scout, Flyer SK2 and Mini ! The first one who can continue this list Clipper, Zephyr,....get 50% discount and worldwide free shipping for this product. Ofcourse anodized in black, blue or red

 

Scout, Flyer, Mini

210.00 *

In stock
can be shipped within 3 days

Dovtail camera groundplate for Clipper Zephyr Archer Scout Flyer SK2 Mini. The first one who can continue this list, Clipper, Zephyr,... gets 50% discount and world wide free shipping for this product. Anodized in black,blue and red

190.00 *

In stock
can be shipped within 3 days

Bartech focus rings Diameter 74,7mm 16mm high, outside diameter 80mm.

This rings are made on an 3D printer, the outer diameter is mashiened on the late mashine and clear coated to avoid that the coulour of the pen find it`s way into the layers of the ring, the ring can be cleand with al cleners, allso with clining fuel and Azeton.

Shipping worldwide 5,50 €

Hablamos Espanol, una pagina Espanola sigue pronto

12.00 *

In stock
can be shipped within 3 days

BarTech Glow in the Dark Focus Ring Diameter 74,7mm x 16mm outside diameter 80mm

This ring is printed on an 3D printer, The compleet ring is made out of flouriszent material. the outside diameter is mashined on an late mashine, and clear coated to avoid that coulour is flowting thour the laiers.  The ring can be cleand with all cleaners, allso with clining fuel or azeton.

Shipping world wide 5,50 €

Hablamos Espanol, una pagina espanola sigue pronto

18.00 *

In stock
can be shipped within 3 days

1 Free BarTech test focus ring. Free shipping worldwide, pleas choose customer pickup by ordering. I would like to have you post a foto on Facebook and a leeve a comment there about this product. The Focus Ring is made on an 3D Printer, the outside is mashiened on an late mashin and clear coated. The ring can be cleaned after use with all regular clening fluids and or with Aceton. The ring is availebal in white or glow green in the dark.

0.01 *

In stock
can be shipped within 3 days

* Prices before VAT, plus delivery
1 - 30 of 48 results