Epoxy resin 2K spatula for gluings

EGOPOXID 2100 Spatula 2K- Epoxy resin adhesive Milky / Transparent for high-quality gluings

Cartridge 50 ml, or cartridge 200 ml, for 2-k glue gunCan 1.4 kg comp. A, can 0.7 kg comp. B 

EGOPOXID 2100 2:1 Spatula is for use on vertical surfaces. Bonding of various building materials (e.g. concrete, natural and artificial stone, steel, aluminium, wood, glass, paper, rigid PVC, polystyrene, etc.). Especially for bonding concrete ashlar and other alkaline materials. Mixing ratio 2:1.

The surfaces must be free of loose parts, load-bearing, dry, clean, free of dust and grease. If necessary, we recommend CONLOC Cleaner 902 for cleaning the substrate.
In general, a higher adhesive strength is achieved with roughened or milled surfaces. EGOPOXID 2100 2k-Spachtel is formulated as a ready-mix and can be used immediately by means of a mixing nozzle. When spraying out of the cartridge, discard the first 10 cm. This is the only way to ensure that components A + B are mixed in the correct proportions.
Attention: Heat accelerates, cold delays curing. At temperatures below +10 °C, processing is not possible. Can processing: Mix components A + B carefully and homogeneously. Mix only the required quantity. Then apply to the bonding area. Cured adhesive can only be removed mechanically.

Technical data:
Raw material Epoxy resin
Density Comp. A approx. 1.2 g/cm3
           Comp. B approx. 1.2 g/cm3
Mixing ratio component A : component B = 2:1                                                            
Processing temperature from +10°C to +40°C
Pot-life approx. 30-40 minutes (30g batch)
                                                    ( 23°C/50% rel. rpm)
Early strength after approx. 4 hours
Machining strength after approx. 12 hours
Final strength after approx. 48 hours
Viscosity Comp. A approx. 400 Pas
Comp. B approx. 700 Pas
Final hardness Shore D: approx. 80 DIN ISO 7619-1
Tensile strength approx. 33 N/mm2 DIN EN ISO 527-1